Homebrew PCBs

Will do. Thank you.

Steve K8JQ

Wayne Topa wrote:
> Steve wrote:
>   
>> One more off the wall question . . . can DipTrace print a mirror image 
>> of a PCB layout?
>>
>> Thanks.
>>
>> Steve K8JQ
>>
>>     
>
> Also a Yes.  Go to their site and Download the PDF manual (User Guide).
> It walks you through the whole process.  Overall it is one of the best 
> manuals I have used.
>
> Wayne
>   
>> Steve wrote:
>>     
>>> Diptrace is free for non-commercial use, up to 250 pins.
>>> http://www.diptrace.com
>>>
>>> After you install it, email them and tell them you are on the Homebrew_PCBs list and they'll send you a free registration code that enables it up to 500 pins, same limitations on non-commercial use but otherwise unlimited.
>>>
>>> I found it very easy to start using, I've even made a few new part patterns. It seems to have every PIC made in there and a lot more ICs.
>>>
>>> Steve Greenfield
>>> no connection, just a happy user of the free version
>>>
>>> --- In Homebrew_PCBs@yahoogroups.com, "Andrew Deschenes" <andybob_2@...> wrote:
>>>   
>>>       
>>>> Hi there!
>>>>
>>>> I'm trying to teach myself to design and etch PCBs and I was wondering what software should I start with? I've been messing around with FreePCB and it seems pretty good, although if I understand it right it doesn't have any auto-routing function built in to it. Is there something decent (and FREE) that I can get that will handle the routing or is there a better overall software package I should be learning?
>>>>
>>>> Note: Whatever I use it must be freeware, as I don't have two nickles to rub together right now.
>>>>
>>>>     
>>>>         
>>>
>>> ------------------------------------
>>>
>>> Be sure to visit the group home and check for new Links, Files, and Photos:
>>> http://groups.yahoo.com/group/Homebrew_PCBsYahoo! Groups Links
>>>
>>>
>>>
>>>
>>>   
>>>       
>
>
>
> ------------------------------------
>
> Be sure to visit the group home and check for new Links, Files, and Photos:
> http://groups.yahoo.com/group/Homebrew_PCBsYahoo! Groups Links
>
>
>
>
>   

-- 
Read The Patriot Post
hppt://PatriotPost.US/Subscribe/ Vetitas vos Liberabit