Homebrew PCBs

Is there a yahoo group or similar support group for Diptrace?

Steve K8JQ

Steve wrote:
> Diptrace is free for non-commercial use, up to 250 pins.
> http://www.diptrace.com
>
> After you install it, email them and tell them you are on the Homebrew_PCBs list and they'll send you a free registration code that enables it up to 500 pins, same limitations on non-commercial use but otherwise unlimited.
>
> I found it very easy to start using, I've even made a few new part patterns. It seems to have every PIC made in there and a lot more ICs.
>
> Steve Greenfield
> no connection, just a happy user of the free version
>
> --- In Homebrew_PCBs@yahoogroups.com, "Andrew Deschenes" <andybob_2@...> wrote:
>   
>> Hi there!
>>
>> I'm trying to teach myself to design and etch PCBs and I was wondering what software should I start with? I've been messing around with FreePCB and it seems pretty good, although if I understand it right it doesn't have any auto-routing function built in to it. Is there something decent (and FREE) that I can get that will handle the routing or is there a better overall software package I should be learning?
>>
>> Note: Whatever I use it must be freeware, as I don't have two nickles to rub together right now.
>>
>>     
>
>
>
>
> ------------------------------------
>
> Be sure to visit the group home and check for new Links, Files, and Photos:
> http://groups.yahoo.com/group/Homebrew_PCBsYahoo! Groups Links
>
>
>
>
>   

-- 
Read The Patriot Post
hppt://PatriotPost.US/Subscribe/ Vetitas vos Liberabit