Homebrew PCBs

Lee Studley wrote:
> I still swear this:
> After the scotch brite and cleaner,
> the last thing to touch the board is either a wipe with acetone, or 
> denatured alcohol (what I usually have on hand) and a quick little blow 
> dryer to remove
> any moisture that condenses from the evaporation.
> 
> -Lee
> 

I found water still beads on the surface after that method. Only way 
I've found to get a continuous water film over the entire copper surface 
is to scotch brite it with heavy duty NaOH based degreaser.