Homebrew PCBs

--- In Homebrew_PCBs@yahoogroups.com, "Ernesto" <ernesto_cordoba@...>
wrote:
>
> Hi all!! I'm trying to make some pcb's using the tonner transfer 
> method. After ironing for about 6 minutes, the paper isn't completely 
> glued on the board. The board was cleaned with acetone so I guess that 
> the paper I'm using isn't appropriate.
> I know Staples paper work fine but I live in France and there isn't 
> Staples products here :-((. 
> Does anybody knows what paper commercialized in France works for this 
> method? Or I must iron more until the paper completely melts on the 
> board?
> 
> THANKS!!!!!
>

MANY THANKS Herbert, Brian, Stephan, Michel, fan_nastelroy for your
answers!!!
In order to answer you all:

I've made other trys, with the same paper EPSON GLOSSY PHOTO PAPER
225g/m but this time I took away a layer of the paper BEFORE ironing,
to make it thinner.
After ironing 5min the transfer is perfect BUT :-)) lots of gelatine
is sticked to the copper (I don't know if that's normal)
I'll try to soke it more time to see if the gelatine dissapear in the
water. 

Ernesto