Homebrew PCBs

I live in Belgium and the best I've found until now is the Premium Plus HP Photo Paper higi-gloss for inkjet. It's more expensive than any other paper but it works really well, down to a few mils (200um). With a laminator set at 150°C, it needs 10 passes, let it cool down (a few minutes) then peel off carefully. You don't need to soak it !

--- On Tue, 10/21/08, Ernesto <ernesto_cordoba@...> wrote:
From: Ernesto <ernesto_cordoba@...>
Subject: [Homebrew_PCBs] Need hint on tonner transfer paper
To: Homebrew_PCBs@yahoogroups.com
Date: Tuesday, October 21, 2008, 7:57 PM










    
            Hi all!! I'm trying to make some pcb's using the tonner transfer 

method. After ironing for about 6 minutes, the paper isn't completely 

glued on the board. The board was cleaned with acetone so I guess that 

the paper I'm using isn't appropriate.

I know Staples paper work fine but I live in France and there isn't 

Staples products here :-((. 

Does anybody knows what paper commercialized in France works for this 

method? Or I must iron more until the paper completely melts on the 

board?



THANKS!!!!!




      

    
    
	
	 
	
	








	


	
	


      

[Non-text portions of this message have been removed]