Homebrew PCBs

HI  Myc

thanks a lot
very good pdf

best regards
juabba

--- In Homebrew_PCBs@yahoogroups.com, "Myc Holmes" <mycroft2152y@...>
wrote:
>
> Juabba,
> 
> Look in the Toner Transfer file folder. The file is named
> Samsung_ML-2010.pdf
>
http://f1.grp.yahoofs.com/v1/8EXMSAh_OnsmYwmIkSIPBDmNVJ41BbIDlotL9oiNJfrnFVirnv8MTfLLR_eCwD376F0kJVzGI30EQ3GvUVb7QGcXcc9A7dxXZw/Toner_Transfer/samsung_ml-2010.pdf
> 
> 
> Next time I'll nclude a link in the original message.
> 
> Myc
> 
> On Sat, Sep 13, 2008 at 7:28 PM, juanabba <jjose.2008@...> wrote:
> 
> >   I am afraid my last note in not clear at all
> > pls let me rephrase it
> >
> > hi
> >
> > I searched the file section but could no find the instruction you
> > mention, when you wrotte:
> >
> >
> > "I've posted the instructins for refurbishng
> > the Samsung cartidge in the files section"
> >
> > thanks a lot
> >
> > juabba
> >
> >
> > --- In Homebrew_PCBs@yahoogroups.com
<Homebrew_PCBs%40yahoogroups.com>,
> > "juanabba" <jjose.2008@> wrote:
> > >
> > > hi
> > > can find the "I've posted the instructins for refurbishng the
Samsung
> > > cartidge in the files section" on the mentioned file section.
> > > could you pls inform the name of it
> > >
> > > thanks in advance
> > >
> > > juabba
> > >
> > >
> > > --- In Homebrew_PCBs@yahoogroups.com
<Homebrew_PCBs%40yahoogroups.com>,
> > "mycroft2152"
> > > <mycroft2152y@> wrote:
> > > >
> > > > I've been using a Samsung ML=2010 laser printer along witha a
Xerox
> > > > laminator for pcb for a while now. The Xerox branded laminator
has an
> > > > adjustable temperature setting for foil that works well with
the high
> > > > temerature toner of the Samsung.
> > > >
> > > > My pcbs started to come out rather poorly after I refilled the
toner
> > > > cartridge. I couldn"t get a solid enough black to act as a resist.
> > > > After some trial and error, I found the the refill toner was not
> > > > compatible with the toner that was left in the cartidge. I emptied
> > > > out all the toner and vacuumed out the cartidge, then refilled the
> > > > toner ad it worked well.
> > > >
> > > > Recently, it started acting up again. I have been using the same
> > > > cartidge for a few yers now and had refilled it a number of
times. I
> > > > went online and found a pdf on how to refurbish a Samsung tom=ner
> > > > cartidge.
> > > >
> > > > What was interesting waa that the toner cartidge has a waste
bin for
> > > > the toner that is not deposited onto the paper. The toner is
scraped
> > > > to clean the roller for the next print job.
> > > >
> > > > I dismantled the cartidge based on the instructions and
emptied the
> > > > waste bin, it was jammed full.
> > > >
> > > > The cartidge works great now.
> > > >
> > > > I've posted the instructins for refurbishng the Samsung
cartidge in
> > > > the files section. It may be useful for other brands too.
> > > >
> > > > One note, there was no "fuse' in my original Samsumn cartidge. The
> > > > instruction are for the Dell branded vesion that had a replaceable
> > > > fuse inside the cartridge.
> > > >
> > > > Myc
> > > >
> > >
> >
> >  
> >
> 
> 
> [Non-text portions of this message have been removed]
>