Homebrew PCBs

So, I could just dip the board in a solder pot, and then wipe it with a damp 
rag (or blow it off with hot air). For that matter, the solder pot can be an 
old pan.

I think so.  The board should be hot first.  It's best that it does not contact the pan, so verticle tanks are best,

You need three things:
1) A clean surface
2) Flux
3) Solder

Preheated flux should work really well + a dip in solder + a wipe + a re-flow


      

[Non-text portions of this message have been removed]