Homebrew PCBs

i know, i know, you told me before.

regards
st


On Thu, 19 Jun 2003 13:58:31 -0500, Brian Schmalz <brian.s@...> 
wrote:

> Stefan,
> 	Because I use the 'scratch' method, I don't plot the actual traces.
> Instead, I use a custom written ULP from Eagle to generate the HPGL 
> output
> for the top and bottom sides of the board. Then I use a program that
> post-processes the HPGL from there and then sends it to the plotter. In 
> this
> post-processing program I suck in the drill file and add filled circles 
> to
> the middle of each hole so as to etch away the copper in the middle of 
> each
> drill hole. So that's the method I use.
>
> *Brian
>
>> i tried plotting with eagle now.
>>
>> seems the described precedure works very fine if you simply set "mirror" 
>> and "rotate" at the cam processor window.
>>
>>
>> but i don't get a good output - too complicated in some areas and
>> the drill holes are also not plot open.
>> PLEASE tell me if anyone has a solution for this.
>>
>> regards
>> stefan
>
>
> Be sure to visit the group home and check for new Bookmarks and files:
> http://groups.yahoo.com/group/Homebrew_PCBs
>
> To unsubscribe from this group, send an email to:
> Homebrew_PCBs-unsubscribe@yahoogroups.com
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>