Homebrew PCBs

On Tue, 8 Jul 2008, fana cute wrote:

> oke thanks djelorie, it works at 12 mils track, may i ask question
> again, have you tried with 8 or 6 mils with same methode? how the
> result?

I've done 8 mil tracks/spacing (actually, I think it was 7.6 mil or
thereabouts, it was for an LQFP with 0.4mm pin pitch) using laser toner
transfer and inkjet paper. Took me a couple of goes to find the type of
paper that would work best (transfer properly without smearing during
ironing).

You just have to experiment a bit and find out what works best for you
with the paper you can get locally. I use Tesco's Value inkjet paper
(which is cheap and seems to do a reasonable job).