Homebrew PCBs

A few days ago, I read on HP website that they are using a special mean to fuse the toner with the transparent so no possible release .

--- On Fri, 7/4/08, DJ Delorie <dj@...> wrote:
From: DJ Delorie <dj@...>
Subject: Re: [Homebrew_PCBs] double sided PCB, accuracy
To: Homebrew_PCBs@yahoogroups.com
Date: Friday, July 4, 2008, 5:49 PM










    
            

Try using laser transparencies instead of inkjet transparencies

(assuming the toner will release afterwards).



The pin trick is easier if you pre-poke the holes from the toner side,

so you can tell where they are.


      

    
    
	
	 
	
	








	


	
	


      

[Non-text portions of this message have been removed]