I note that your LEDs are laid out with overlap in one axis but none
in the other. I suggest that you need to have all neighbouring LEDs
overlap the same amount to obtain a more even coverage. With your
'offset row' layout each LED has 6 neighbours to overlap with.(4 on
the edges)
All the best with the fine tuning.
DJ Delorie wrote:
in the other. I suggest that you need to have all neighbouring LEDs
overlap the same amount to obtain a more even coverage. With your
'offset row' layout each LED has 6 neighbours to overlap with.(4 on
the edges)
All the best with the fine tuning.
DJ Delorie wrote:
>
>
> Just finished wiring mine up...
>
> http://www.delorie.com/pcb/uvled/
>
> I layered the LEDs between two sheets of plywood hoping they'd keep
> things aligned, but not quite good enough I suppose. Time to fiddle I
> suppose.