Homebrew PCBs

Nice setup, the same thing could be used to modify a laser printer or
copier laminator, which are usually designed a bit more heavy-duty in
regards to heat tolerance (mine is mostly metal construction).

I used a much more primitive circuit for the temperature regulation,
but if i had to do it again i would also use an industrial controller.
They are cheap on ebay and have a nice display built in.

ST

On Mon, Apr 7, 2008 at 3:09 AM, josemj1 <kerwoodderby@...> wrote:
> Well, as threatened, I wrote up my inexpensive laminator modification.
> You can find it in the Files sections as "CheapLaminatorModification.pdf"
>
> I hope this helps "give back" a little to the community.
>
>
> ------------------------------------
>
> Be sure to visit the group home and check for new Links, Files, and Photos:
> http://groups.yahoo.com/group/Homebrew_PCBsYahoo! Groups Links
>
>
>
>
>