--- In Homebrew_PCBs@yahoogroups.com, "v_sahin" <v_sahin@...> wrote:
more about your work. It sounds as if you are getting excellent
results after putting in a *lot* of hard work, doing things in what
seems to me one of the best ways.
A design done in FPGA may not excite the maximum amount of interest
amongst all readers here, but I can see how doing the design this way
gives control over critical parameters you might not be able to
optimize otherwise.
I can only speak for myself, but this seems eminently on-topic to me.
-- Dave
> Hi All,...
> I spent couple of months(~4 months) to design my own flat bed inkjet
> Note: I don't know whether the details of the design is an off topicI am fascinated by what you are doing. I would dearly love to know
> or not for this group. I need feedback from Steve.
more about your work. It sounds as if you are getting excellent
results after putting in a *lot* of hard work, doing things in what
seems to me one of the best ways.
A design done in FPGA may not excite the maximum amount of interest
amongst all readers here, but I can see how doing the design this way
gives control over critical parameters you might not be able to
optimize otherwise.
I can only speak for myself, but this seems eminently on-topic to me.
-- Dave