Homebrew PCBs

Don't play around with that.

A phone call to the NG company and they will be there within an hour. 
And they have highly sensitive equipment that will be able to tell you
if there is a real problem.

My wife smelled NG once in our house, and we called, and it turned out
there was a minute gas "puff" coming out of the furnace each time it
lit.

The NG guy used his equipment and easily traced it.

  Jawa Lunk <http://www.kingofbots.com>
   [Profiles, pics, videos, Buy, Sell & Trade Droid Parts and Props!] 
<http:www.the-sandcrawler.com>
www.KingofBots.com <http://www.kingofbots.com>    |  Lunk's Projects
<http://www.kingofbots.com/3.html>    |  Droid Parts
<http://jlmech.ecrater.com>

  www.Wall-EBuilders.com <http://www.wall-ebuilders.com>   - Official
Wall-E Builder's Group

MySpace <http://www.myspace.com/jawa_lunk>   - Lunk's Spot

   [Jawa Lunk's Facebook profile] 
<http://www.facebook.com/people/Jawa_Lunk/844359732>

--- In Homebrew_PCBs@yahoogroups.com, "ed.slatt" <ed.slatt@...> wrote:
>
> Hello,
>
> Do any of the basic homebrew PCB processes put off Carbon Monoxide?
> Do any of the processes put of any chemical that can trick/damage CO
> detectors?  My middle level CO detector went off a few days ago.
> After talking myself back into the house I changed batteries in all of
> my fire/CO detectors and swapped the upstairs detector for the middle
> level detector that triggered.  A few days later the new middle level
> detector went off.  The offending location is on a hallway ceiling
> that is half way between the garage where I park my car and the
> basement where I etch/tin PCBs.  I've been doing both for ~2 years
> with out an alarm.  My house is heated via NG.  Any comments or
> suggestions will be greatly appreciated.
>
> Ed
>



[Non-text portions of this message have been removed]