Homebrew PCBs

Also, all this weeding can't be good for you.
I mean, the idea is _not_ to have to do everything manually, right?

ST

On Jan 21, 2008 12:22 PM, Jerome Decock <jerome@...> wrote:
> There is no way a vinyl cutter could cut such small pads, at least the one I
> have (Roland CAMM, the same as in the first link) will not do anything
> smaller than 4 mm(0.15") square without ripping the vinyl/copper. Also
> corners tend to be rounded by the blade. I tried this method for making self
> adhesive copper tracks with the same material used in link 1 and same
> settings and it doesn't work for tracks thinner than 0.10/0.15".
> Additionally the self adhesive copper foil I used was very expensive.
>
>   _____