Homebrew PCBs

Harvey White wrote:
> On Mon, 03 Dec 2007 14:32:12 -0600, you wrote:
>
> OK, the transparency is a single use item.  You don't iron it on,
> because that puts a layer of something (goo) on the board.  Of course,
> there's the glue you use to hold it on, but in that case, you have a
> choice of what to use.  You reverse it so that the printing is on the
> bottom, and won't be easy to wear away.  Goes on the top of the board,
> of course.
>
> You laser print on the back of the transparency, that's the SS layer.
> You could just as easily go color with transparency film and an ink
> jet.
>
>
> Harvey
>
>   
Ok, thanks for clearing that up. I need to buy some transparencies for 
both ink jet and laser then so I can see which works for me.
Dave