Homebrew PCBs

I use SSC, too.

I've rescued a -lot- of clogged Epsons, some that have sat for years 
after clogging.

Use the solution I gave on my site, and use lots and lots of 
patience. And remember, if a little of something is good, that does 
NOT mean that a lot is better! If I say to get the park pad damp, 
that does NOT mean flooding it is better! More ammonia is NOT better.

And plain steam distilled or filtered water is better than any 
alcohol.

Steve Greenfield

--- In Homebrew_PCBs@yahoogroups.com, Michel Baguet <bagmik@...> 
wrote:
>
> one more word, I used the SCC service utility to clean the print 
head 
> 
> http://www.ssclg.com/epsone.shtml
> 
>