Homebrew PCBs

I guess...all I know is if you tape your design to the copper and if 
you use the hot iron method like I do it peels right off. When I 
etched the board, wherever the tape was, was completely gone. I think 
the heat in the film processor is only about 85-90C so I was 
surprised.

--- In Homebrew_PCBs@yahoogroups.com, Philip Pemberton <ygroups@...> 
wrote:
>
> SNIP < 
> If that's anything like the Fujifilm tape we use on the film 
processor at 
> work, it's a thick-ish blue plastic tape with a silicone-based 
adhesive on the 
> back. Kinda like 3M Kapton tape, but thicker.
> 
> -- 
> Phil.                         |  (\_/)  This is Bunny. Copy and 
paste Bunny
> ygroups@...         | (='.'=) into your signature to help him gain
> http://www.philpem.me.uk/     | (")_(") world domination.
>