Homebrew PCBs

When I look in the album its empty.
helge

2007/3/26, wnnelson0 <wnnelson@...>:
>
> I modded a C88 without hacking the frame. I made new bushings for the
> drive shaft which lowered it by .100". I trimmed off the outfeed
> rollers to give a flat carrier path and moved the paper sensor to the
> front. This allows a carrier with no cutout notch for the timing. I put
> a smaller gear on the end of the drive shaft for the vacuum pump
> because there was no room for the original gear. This causes the pump
> to run slower but does not seem to affect the operation. I hope this
> will help with the clogging problem as the cleaning station has not
> been modified. I added a little tubing to the pressure rollers to give
> it a little extra pressure as the carrier is too far away for the
> regular roller. So far it is working great. I am trying some generic
> ink which is only $4 a cart and is supposed to be just like the
> original (well see). PCB trials to follow. Pictures are posted under
> C88 lowering mod.
>
>
>
> Be sure to visit the group home and check for new Links, Files, and
> Photos:
> http://groups.yahoo.com/group/Homebrew_PCBs
>
> If Files or Photos are running short of space, post them here:
> http://groups.yahoo.com/group/Homebrew_PCBs_Archives/
> Yahoo! Groups Links
>
>
>
>


[Non-text portions of this message have been removed]