--- In Homebrew_PCBs@yahoogroups.com, "Andrew" <andrewm1973@...> wrote:
Steve Greenfield
> > Steve Greenfield wrote:I see. I'd missed that part.
> > The Alps ribbon is about 12 to 15mm wide.
> > Prints 8.5x14 page.
>
> But part of the thread had drifted off to
> say
>
> Print on the film a negative of what you
> want then remove the film from the printer
> and iron it on like toner transfer
>
> if you did THAT you would either be stuck
> with a PCB as wide as the film OR have to
> spend a lot fo time lining it up.
Steve Greenfield