Homebrew PCBs

--- In Homebrew_PCBs@yahoogroups.com, "docstein99" <docstein99@...> 
wrote:
>
> > well if you make a cad tray design 
> > as ive discovered 
> > some ridges on it are needed for locking 
> > {a small ridge on the far left top corner }
> 
> Let me get this printer to prove me some results first.  If I cant 
get 
> it to work its going right back to the store.  I will simply cut a 
pcb 
> in the shape of a cd-rom and try and print to that.
> 
> If it works - I could use a hand with dimensions for a suggested 
layout 
> on a tray.  If it works, I may cut one and ship it to you.
>


ive done this to a cd shaped single sided board

trouble i came to is that it requires ink for mispro 
well my one did other inks work
but so far this mispro seems the best choice 
so ill order some from usa  i suppose
i cant find it in the uk so far...

ive uploaded the stuff i did today 
i realise it would be a trial 
and error from the start atleast i found out a few hints

http://uk.geocities.com/vsmvdd/artwork/

....

i placed in edaboard a design for an electroplater with ramp pwm 
technique
if anyone doesnt know how to... thru plate..