Homebrew PCBs

--- In Homebrew_PCBs@yahoogroups.com, "docstein99" <docstein99@...> 
wrote:
>
> I'm very impressed!  Fortunately, I do have a cnc milling machine so 
> making a feed tray shouldnt be a problem.  Some more research I found 
> the lowest price for the printer is $79 at comp-usa.  Reading closer 
I 
> found that other price was a mail-in rebate if you bought the printer 
> and also a camera :(
>

well i made a small cd size pcb disk .5mm board

i had mixed results weep !!  

becouse i didnt fry the board long enough 
over direct heat i see after a re read {i'm too quick you see }

instead i oven baked it 
ehhh eehhehehhehe !!
so ive reprited it 

thou did rediscover dipping pcb in etchant for a few seconds  
cleans the pcb board well
and  makes it a nicer surface for the next print !
 
this time ill dry it over night then bake it over the ring this time
and report the result tomorrow 

the silk screen worked very well  a nice end ,,,   
i recon direct application of an art fixer spray  
is enought to seel it for good

see the pics one edaboard   link in previous posts