Homebrew_PCBs

--- In Homebrew_PCBs@yahoogroups.com, "Stefan Trethan"
<stefan_trethan@...> wrote:

>
> On Thu, 08 Mar 2007 13:46:52 +0100, Paul Sturpe <sturpe@...>
> wrote:
>
> > Stefan,
> > I finally got started to dis-assemble the C84. This gives me a
> > better look at the mechanism. I have cleaned the parking pad,

but I

> > don't see the vacuum hose you talk about. Can you give me

directions

> > of where to look for the vacuum hose?
> > Thanks,
> > Paul
>
>
> It sucks through the black pad right under the head, so it is

attached at

> the underside of that plastic part. I think there is even a way to

lift

> that part without removing any screws, but i'm not certain. There

is a

> single screw holding the whole parking station on the inside of

the

> printer, the outside edge is held with a spring catch.
>
> ST
>

Do you mean under the pad that is beneath the black ink cartridge
when the head is parked?
Pau