Homebrew PCBs

> It\ufffds not so hard to modify a XY printer and they are quite cheap (
> used ), the problem is, finding the right ink to do this job ...
>hobout squishing these two together
http://www.hackaday.com/2006/10/08/inker-the-hand-inkjet/
http://www.fabathome.org/wiki/index.php?title=Main_Page
>Brian


sniffing around here
http://www.xpress3d.com/Materials.aspx?sh=1
I dont see any info about the viscosity of these resins in the data sheets 
but if they would pass through a printhead ok or be thinned down somehow and 
then cured with an IR light source ... any thoughts

Thomas