Homebrew PCBs

I run out of press n peel so reading thought the net i found that 
poeple are using some magazines to print on to. 

Im not a reader of these magazines so i opted to try what ever paper i 
could find.

The best i found so far was from the MAPLIN electronic catalogue. as 
the paper is so thin i ripped a page from the catalogue and taped it to 
a sheet of normal A4 paper and then printed on that.

As it turned out this paper is quite good and comes right off the toner 
bye just adding a little water,leaving the a nice clean print on the 
board. No scrubbing needed !

best bit is you get over 900 pages of the stuff for a round a �5!

Give it a go, let me know what you think/

Gary.