Homebrew PCBs

The upside is better current capability, have had plated holes burn through
on some analog boards.

  -----Original Message-----
  From: Homebrew_PCBs@yahoogroups.com
[mailto:Homebrew_PCBs@yahoogroups.com]On Behalf Of David McNab
  Sent: Tuesday, January 02, 2007 7:21 PM
  To: Homebrew_PCBs@yahoogroups.com
  Subject: Re: [Homebrew_PCBs] Through Hole Plating Alternative


  On Tue, 2007-01-02 at 22:06 +0000, Paul Sturpe wrote:
  > What is the best (read most fool proof) way for a neophyte PCB
  > builder
  > to get continuity through the holes on a double sided board?

  The best, cheapest and most reliable way I can think of is the obvious
  method, needing no extra equipment or expense: stick wires through each
  of your vias and solder them on each side. The main downside is the
  addition of extra per-board labour.

  Cheers
  David



  


[Non-text portions of this message have been removed]