Homebrew PCBs

On Sat, 23 Dec 2006 22:37:19 +0100, crankorgan <john@...> wrote:

>   When he put the plans online that was no help. His comments and
> the fact he introduced problems into the design. Brute has a stubby
> 1-1/4" Z axis pipe. Dave Kush did things correctly only showing the
> machine. He is a member of my group. Dave and I both changed the
> Z-axis pipe within days to 1-1/4" pipe. When people give me
> suggestions I am usually into another project or I have the update
> done and I am testing it. The Brute was a NCF2000 then NCF2001 which
> became PCBmill and then Brute. The free plans are a poor copy of the
> PCBMill. At one point I had two PCBMills turning out milled Piker
> boards. Then with some help from Hans here I got a PC house to make
> the Piker boards.


But are these _his_ plans, or _your_ plans?
If he has copied them from you, i can understand your dissatisfaction  
about the whole thing, but if they are merely plans of a machine he has  
built on his own, i don't see the probem?

ST