Homebrew PCBs

wrong forum?
  use TL431.

Thomas <teecee@...> wrote:
  sorry Lads wrong forum

----- Original Message ----- 
From: "Thomas" 
To: 
Sent: Tuesday, December 19, 2006 12:52 AM
Subject: Resistor Divider network using a multi turn Pot


>I was thinking about using a multiturn pot as a RD network to scale down 
>+5V to +2.5V for my Data Aq as some of the sensors are +5V, normaly I have 
>used 1% resistors or better but was wondering about a multiturn pot to do 
>this job, lets say that a 5k pot is set to somewhere in the middle of it 
>range at 2.5K ohms once this is set to show the correct scaling of 2.5V is 
>it always going to be good enough I mean will it be as good as the 1% 
>resistor setup ? my thoughts are that Temperature fluctuations or any 
>variations will affect the pot as whole keeping things in proportion and 
>scaled accordingly.
>
> Thanks
> Thomas 



Be sure to visit the group home and check for new Links, Files, and Photos:
http://groups.yahoo.com/group/Homebrew_PCBs

If Files or Photos are running short of space, post them here:
http://groups.yahoo.com/group/Homebrew_PCBs_Archives/ 
Yahoo! Groups Links





 __________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com 

[Non-text portions of this message have been removed]