Homebrew PCBs

--- In Homebrew_PCBs@yahoogroups.com, "jpanhalt" <janhalt@...> wrote:
>
> --- In Homebrew_PCBs@yahoogroups.com, "Tony Smith" <ajsmith@> 
> wrote:
> >
> > > Thanks for answering my message.  I didn't expect to get so 
> > > many replies so soon!  
> > > 
> > > It sounds like this product I'm looking for is rare or 
> > > non-existant because I think one of the people that answered 
> > > would have heard 
> > > something like this.  But just for fun, let me elaborate.   
This 
> is 
> > > what I'm looking for:
> > > 
> > > 1) Start with a double sided copper clad pcb for etching.
> > > 2) Drill (or punch) holes every .1" horizontally and 
> > > vertically in a grid (like perfboard).
> > > 
> > > A single sided board drilled so would also be useful, because 
> > > for those occasional times when you need to send wires over 
> > > the other side to cross over other traces, you at least have 
> > > the holes for the pads predrilled.
> 
> 
> I believe Injectorall makes what is being described on FR4 
(B3426D);  
> DigiKey #PC44P-ND.  John
>

This may fit the bill, though I wish I could get a picture of this so 
I can make sure its not pretinned.  The correct Digikey PN seems to 
be B3426D-ND.

Thanks,
Don