Homebrew PCBs

--- In Homebrew_PCBs@yahoogroups.com, "Tony Smith" <ajsmith@...> 
wrote:
>
> > Thanks for answering my message.  I didn't expect to get so 
> > many replies so soon!  
> > 
> > It sounds like this product I'm looking for is rare or 
> > non-existant because I think one of the people that answered 
> > would have heard 
> > something like this.  But just for fun, let me elaborate.   This 
is 
> > what I'm looking for:
> > 
> > 1) Start with a double sided copper clad pcb for etching.
> > 2) Drill (or punch) holes every .1" horizontally and 
> > vertically in a grid (like perfboard).
> > 
> > A single sided board drilled so would also be useful, because 
> > for those occasional times when you need to send wires over 
> > the other side to cross over other traces, you at least have 
> > the holes for the pads predrilled.


I believe Injectorall makes what is being described on FR4 (B3426D);  
DigiKey #PC44P-ND.  John