Homebrew PCBs

On Fri, 15 Dec 2006 06:30:15 +0100, Tuck Hartshorn <tuck@...> wrote:

> Stefan, the C84 conversion webpage says, "If you use very thin  
> (60mil/1.5mm),
> then skip these steps.
> Am I missing something. To me, 60mil or 1/16" is quite thick. It used to  
> be
> the most common available but I see 1/32 and 1/64 is now fairly common,  
> too.
> Are you saying that the C84 will pass the smaller gauges without  
> modification?
> How thick can the C84 take before the head needs to be raised?
> TIA,
>  (also, I'm curious as to why you chose the C84 if there is any other  
> reason
> other that it was "there")
> Tuck


I don't remember saying that, could you give me a link so i can see the  
context?

I selected the c84 mostly because it was the most plentiful, yes. You  
could always find one on ebay for 1eur.


ST