On Thu, 30 Nov 2006 17:01:47 +0100, DJ Delorie <dj@...> wrote: > > I see that too. I can sometimes do thinner traces if there's more > space between them, or smaller spaces if there's more copper around > them, but 7/7 is about the limit for me. I think spray etching could improve performance, but 7mil is good enough for me, usually i don't use anything under 10mil. ST
Message
Re: [Homebrew_PCBs] How thin can you do traces with toner transfer method?
2006-11-30 by Stefan Trethan