Homebrew PCBs

>  Staedtler Lumocolor are very good. You need to make sure that the copper is
>  very clean, whatever you use. I used to use cellulose paint with a fine
>  paintbrush; fine lines are possible if the paint is thinned somewhat.
>
>  Leon

Thanks for that wonderful idea! I happen to have some silver paint
that thins ok with celly thinners, and a 5ltr can of it in the shed, I
Was planning to redo my alloy wheels for the car!

Bet it melts the plastic pens............

I bet the thinners makes a good pcb wipe/degreaser too.

Lez