Homebrew PCBs

There's an idea. Use a laser plotter to burn the resist, rather than mill 
around the traces. Or burn the traces, and plate before chemical etching. 
Alas, I don't have a laser engraver on hand to try.


----- Original Message ----- 
From: "Peter May" <peter@...>
To: <homebrew_pcbs@yahoogroups.com>
Sent: Saturday, November 18, 2006 8:24 PM
Subject: [Homebrew_PCBs] CNC and UV leds


> Hi all.
>
> I recently saw a few articles on using UV leds to expose photoresist
> type boards and have to admit, I have tried various methods and am going
> to try this one. I also did a quick search in this list archives before
> starting this thread.
>
> I was wondering in one could concentrate the UV light from a LED via a
> lens like in the laser pointers and create a pin point uv light. Then,
> in making a CNC type machine (yes I belong to the cnc groups as well)
> use this method to simply draw the tracks onto the board directly. One
> would have to create a test run every sop often but I wouldn't mind
> seeing anyone elses posts if they have tried this.
>
> Peter
>
>
>
>
>
> CHECKOUT my experience with my lack of help from I-MATE in regards to my
> JASJAR at www.gizmoman.net/i-mate.htm
>
> For a list of current designs, projects and engineering tasks as well as
> radio's, electronics, gadgets and gizmo's for sale visit 
> http://www.gizmoman.net
>
> This email has been addressed to homebrew_pcbs@yahoogroups.com and sent 
> from
> Peter May peter@.... Please notify sentspam@...
> if you feel this message is SPAM.
>
>
>
>
>
> Be sure to visit the group home and check for new Links, Files, and 
> Photos:
> http://groups.yahoo.com/group/Homebrew_PCBs
>
> If Files or Photos are running short of space, post them here:
> http://groups.yahoo.com/group/Homebrew_PCBs_Archives/
> Yahoo! Groups Links
>
>
>
>