On Sat, 30 Sep 2006 16:42:49 +0200, kilocycles <kilocycles@...>
wrote:
close it up. I used thin PE or PP tape.
Best seems to be to avoiding to mask stuff at all, simply etch both sides
at once.
ST
wrote:
> OneI found the problem goes away if i rub the overlap with a fingernail to
> problem, yet unsolved, which was not part of the test, is performance
> of tape when it has to overlap for coverage. I've been getting some
> seepage under the overlaps at the edge of the boards using 3M 33+
> electrical tape.
close it up. I used thin PE or PP tape.
Best seems to be to avoiding to mask stuff at all, simply etch both sides
at once.
ST