Homebrew PCBs

Hi, Derek.

Nice solder paste and pick & place machine. Very interesting.

Can I ask you to provide additional info and pictures of the solder paste machine? In particular, how the solder paste mechanism works. Also, details on what was used for the solder paste dispensing (needle, pump, motor, driver, software and timing control, etc.)?

I intend to use it to make a DIY paste (glue actually) dispensing in a folding and gluing machine for making boxes. Can I communicate with you in private for additional info?

Thanks in advance.

Weedy


  ----- Original Message ----- 
  From: Derek Barger 
  To: Homebrew_PCBs@yahoogroups.com 
  Sent: Wednesday, September 20, 2006 9:13 AM
  Subject: [Homebrew_PCBs] SolderPaste dispenser and Pick and Place.


  I thought some might be interested to see a couple of video of a
  homemade solder paste machine and Pick and place.
  These were done on a Taig with DenverCNC controller using Mach2 and my
  modular work holding system.
  Steve and I did this along time ago but just recently got the video up
  on Steve's site.

  http://www.ciciora.com/surface_mount.html
  http://www.ciciora.com/picknplace.html

  There is also a hotplate video melting the surface mount after the
  pick and place was done.

  Derek B.
  www.hightechsystemsllc.com


   

[Non-text portions of this message have been removed]