Homebrew PCBs

Hello Len.

babelfish.yahoo.com translated
http://freeweb.supereva.com/mauroh.mybox/pcbconplotter/pcbconplotter.htm
(?) Italian to English to this:


(Clicca on the images in order to magnify them)
The procedure is much simple one, enough to design the PCB with just the
preferred program and to print directly on the clean sideburn.
In order to fix it to the plan it is necessary of the adhesive tape and he
is indispensable to load the pen-nibs with indelebile ink.
If it is not succeeded to find the ink in stationery store, a indelebile one
put in an appropriate support for plotter can be used common pennarello.
If it is not had such support, the refil will have to be removed from the
pennarello, and after to have cut it, it is arranged within a normal
pen-nib.
In order to see the circuit in this way ended realized clicca here.


For whichever information you also write to me transistor@...





I hope that is helpful.

----- Original Message ----- 
From: Len Shelton
To: Homebrew_PCBs@yahoogroups.com
Sent: Saturday, September 02, 2006 11:04 AM
Subject: [Homebrew_PCBs] PCB Plotter


Anyone care to take a stab at translating this page? Looks like he's using
an HP plotter to plot directly on the substrate.

http://freeweb.supereva.com/mauroh.mybox/pcbconplotter/pcbconplotter.htm?p

>Len

[Non-text portions of this message have been removed]