Homebrew_PCBs

On Monday 14 April 2003 01:52 pm, Dell Gillispie wrote:

> Thanks: Ned, Derek, and John. I think one solution would be to
> group the whole drawing and then copy and paste it. Can't get the
> "Group" command to work. Must be doing something wrong. Any
> thoughts?

Just open the board file, as this won't back-annotate. If the
schematic opens, close it. Now you can turn on all layers, group all,
cut/go, paste.

--
Ned Konz
http://bike-nomad.com
GPG key ID: BEEA7EFE