Homebrew PCBs

In my previous experiments I realized that yellow is the most etch resistant one, second is magenta third is cyan and worst one is black. In color black printing my printer uses cyan, magenta and yellow to generate black. To minimize the effects of clogged nozzles it is much better to use 3 color and select black to have almost equal contribution from each color. You can only use yellow for each cartridge which results most etch resistant ink on your PCB but yellow is transparent and difficult to do visual inspection because of that I mixed the inks and used as a cyan cartridge.
  Volkan

cristian <cristianbip@...> wrote:
  What really pre-mix means:
  that the components are different and they react each to other to make a 
water resistant one?
Cristian




Be sure to visit the group home and check for new Links, Files, and Photos:
http://groups.yahoo.com/group/Homebrew_PCBs

If Files or Photos are running short of space, post them here:
http://groups.yahoo.com/group/Homebrew_PCBs_Archives/ 



  SPONSORED LINKS 
        Electrical engineering degree online   Electrical engineering degree   Printed circuit board     Electrical engineering   Electrical engineering course   Electrical engineering graduate school 
    
---------------------------------
  YAHOO! GROUPS LINKS 

    
    Visit your group "Homebrew_PCBs" on the web.
    
    To unsubscribe from this group, send an email to:
 Homebrew_PCBs-unsubscribe@yahoogroups.com
    
    Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. 

    
---------------------------------
  




[Non-text portions of this message have been removed]