Except that is a lower resolution, isn't it?
I would turn color correction back on in the driver and turn the
sliders down to reduce the ink without reducing the resolution.
Steve Greenfield
--- In Homebrew_PCBs@yahoogroups.com, Robert Hedan <robert.hedan@...>
wrote:
I would turn color correction back on in the driver and turn the
sliders down to reduce the ink without reducing the resolution.
Steve Greenfield
--- In Homebrew_PCBs@yahoogroups.com, Robert Hedan <robert.hedan@...>
wrote:
>
> If ink beads so much, I'd try using DRAFT quality. Maybe this is one
> situation where less is better.
> > Sorry.... first test not fully successful. Details here:
> > http://www.polyphoto.com/tutorials/DirectInkjetPCBs/index.html
> >
> > Next steps:
> > 1. Get a better scrubby pad
> > 2. Wipe down with 99% isopropyl
> > 3. Pre-etch
> > 4. Lift the pizza wheels
> > 5. Heat the board before printing