Homebrew PCBs

--- In Homebrew_PCBs@yahoogroups.com, "derekhawkins" <eldata@...> wrote:
>
> >Cold solder, not enough solder,
> >solder joint missing (lower side of the 2K2 resistor near the 
> >tantalum capacitor, left side of the board)
> 
> Nonsense! Reflections, shadows and tricks of light. The joint you claim 
> to be missing is very much there. You have to look carefully. 
>

I agree. I can see things that could be taken as missing solder or bad
joints, but on close inspection are just reflections fooling the eye.

Steve Greenfield