Homebrew PCBs

I haven't found a cheaper alternative to Pulsar transfer paper that gets
quality results.

I meant drum, not roller.  I just slightly touched it with tweezers to get
some lint out of the roller and that did the job.  It left miniscule
scratches in the finish and that was all it took.  Live and learn.

Robert
:(


-----Message d'origine-----
De : Homebrew_PCBs@yahoogroups.com [mailto:Homebrew_PCBs@yahoogroups.com] De
la part de Stefan Trethan
Envoyé : avril 6 2006 13:34
À : Homebrew_PCBs@yahoogroups.com
Objet : Re: [Homebrew_PCBs] RE : Update on toner transfer


You can try to use a cheaper paper so it doesn't matter so much of you  
waste more, i use half sheets too.
To stick a smaller piece down you can use paper tape or laser printer  
labels, but this will always lead to increased paper thickness which means  
less toner density.

If your drum was not damaged you could probably set the printer to  
envelope printing or something to switch off the lights...

ST




Be sure to visit the group home and check for new Links, Files, and Photos:
http://groups.yahoo.com/group/Homebrew_PCBs

If Files or Photos are running short of space, post them here:
http://groups.yahoo.com/group/Homebrew_PCBs_Archives/ 
Yahoo! Groups Links