You can find unclad pcb material on Ebay.Look up copper clad pcb material.I have some unclad listed at around .02 cents per sq.in. and that includes shipping.
Bill
John Popelish <jpopelish@...> wrote: shaneperch@... wrote:
> Where can I get pcb fiberglass uncladded for a reasonable price? thanks
> Tom
McMaster-Carr carries lots of different kinds and sizes of insulating
board, including fiberglass epoxy (GP03 and FRP).
Whether their prices are reasonable is a matter of opinion.
I.E. 12" by 12" by 1/16" GP03 runs about $3.54 each, plus shipping.
http://www.mcmaster.com/
Be sure to visit the group home and check for new Links, Files, and Photos:
http://groups.yahoo.com/group/Homebrew_PCBs
If Files or Photos are running short of space, post them here:
http://groups.yahoo.com/group/Homebrew_PCBs_Archives/
---------------------------------
YAHOO! GROUPS LINKS
Visit your group "Homebrew_PCBs" on the web.
To unsubscribe from this group, send an email to:
Homebrew_PCBs-unsubscribe@yahoogroups.com
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
---------------------------------
---------------------------------
Yahoo! Messenger with Voice. Make PC-to-Phone Calls to the US (and 30+ countries) for 2ยข/min or less.
[Non-text portions of this message have been removed]Message
Re: [Homebrew_PCBs] Aquiring fiberglass pcbs that have no clad..
2006-04-05 by Bill