Homebrew PCBs

car's gas line antifreezer, is pure isopropyl alcohol.
why don't use it? 
  ----- Original Message ----- 
  From: kilocycles 
  To: Homebrew_PCBs@yahoogroups.com 
  Sent: Saturday, February 18, 2006 1:50 PM
  Subject: [Homebrew_PCBs] Isopropyl Alcohol


  There was thread awhile back about using isopropyl alcohol as a board
  prep cleaner. The typical stuuf you find is 70%, but you can also get
  91%, which is what I buy as a wound disinfectant/cleaner of
  contacts...but it still has a significant amount of water.

  In the 2006 Allied catalog, there is some very desirable stuff:
  99.953% pure anhydrous isopropyl alcohol.  Pricey for 3.5 oz (100 ml)
  at $4.46, but not bad for 500 ml at $6.53.  So, it's available.

  Ted 





  Be sure to visit the group home and check for new Links, Files, and Photos:
  http://groups.yahoo.com/group/Homebrew_PCBs

  If Files or Photos are running short of space, post them here:
  http://groups.yahoo.com/group/Homebrew_PCBs_Archives/ 



  SPONSORED LINKS Electrical engineering degree online  Electrical engineering degree  Printed circuit board  
        Electrical engineering  Electrical engineering course  Electrical engineering graduate school  


------------------------------------------------------------------------------
  YAHOO! GROUPS LINKS 

    a..  Visit your group "Homebrew_PCBs" on the web.
      
    b..  To unsubscribe from this group, send an email to:
     Homebrew_PCBs-unsubscribe@yahoogroups.com
      
    c..  Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. 


------------------------------------------------------------------------------



[Non-text portions of this message have been removed]