Homebrew PCBs

The toner is transferred to the paper from the drum via electrostatic  
charge.
This is not working with metal.

Some time ago when we talked about the silicone paper someone who has now  
left the list tried or planned to try using a silicone roller to  
statically take the toner from the drum, and directly transfer in on a  
heated PCB. An idea but a lot of work.


Short story, it's not that easy. Long story, look in the archives.

ST


On Mon, 13 Feb 2006 20:15:00 +0100, jam5411 <mardock@...> wrote:

> I read with much interest all the work that is going into the TT
>
> method of creating artwork on copper. Has anyone experimented with
>
> modifications to a Laser Printer to directly apply the artwork to the
>
> copper? Seems this would solve a lot of the issues, if it were
>
> possible. I remember a few years back I had a Laserjet 4L. It had a
>
> straight through path and would accept some pretty thick card stock as
>
> I recall. Now I wish I had not thrown it out in the late last century...
>
>