Just going to throw in my 2 cents... I picked up a GBC 9in laminator from Office Max for $30. Four passes and the toner is fused to the copper. Keith --- In Homebrew_PCBs@yahoogroups.com, Mycroft2152 <mycroft2152@...> wrote: > > Add to your list of good laminators: > > Xerox XRX-LM1910 > > It's $39 after rebate at STAPLES. > > It's rugged, will do regular thickness boards, and has > a thermostat. The setting for "Foil" seems to work the > best. > > TANSTAAFL! > > Myc > > --- wbblair3 <wbblair3@...> wrote: > > > --- In Homebrew_PCBs@yahoogroups.com, "newaag" > > <newaag@> wrote: > > > > > The key for thicker boards is to put the board > > into the laminator on > > > a diagonal. I use a very thin paper "wrapper" > > (8.5x11 folded in > > > half) around the board and transfer paper, it keep > > the transfer > > > paper/foil from moving on the first feed. I use > > 4-5 passes, and the > > > board is really hot by the last pass. > > > > Bob, > > > > This is OK for even cheap laminators like mine? I'm > > primarily afraid > > of damaging the rollers or is that not likely > > because of the rubber > > used? If so, I'll give it a try! > > > > > I found that emailing sellers with "as is" > > laminator auctions and > > > asking them to put paper through the laminator (do > > the rollers feed? > > > Does it heat up?) can net you a cheap laminator > > that others will > > > ignore. > > > > > > the Ibico PL-260 is similar to the PL-330 - here's > > one on > > > Ebay at 20., no bids, 2 days left - EBay Item > > number: 7587342580 > > > These sold for about 500. new and weigh about > > 25-30lbs - metal gear > > > motors, 4 big fat rubber coated rollers, etc. - > > industrial strength. > > > > Many thanks for the info on Ibico laminators and > > tips on what to buy. > > I'll try to work with what I've got right now, but > > I'm saving a list > > of the models you mentioned if I ever decide that I > > need something > > better. Here's what I've got so far: > > > > Ibico PL-260 > > Ibico PL-330 > > Ibico EL-12 II > > > > Are there any others to add? > > > > Thanks! > > Bill > > > > > > > > > > > > > __________________________________________________ > Do You Yahoo!? > Tired of spam? Yahoo! Mail has the best spam protection around > http://mail.yahoo.com >
Message
Re: Toner transfer experiments and a fix for cheap, low-temp laminators
2006-02-08 by Keith Applegarth
Attachments
- No local attachments were found for this message.