Yahoo Groups archive

Homebrew PCBs

Index last updated: 2026-04-03 21:38 UTC

Message

Re: Toner transfer experiments and a fix for cheap, low-temp laminators

2006-02-07 by adicont2

A perfect board preparation is crucial for good results. I have same 
problem in the past and I blame my iron too. Now I spent at least 10 
minutes to board preparation (Scoch&Brite + Ajax + hard work).
My iron seting is in 200C range. This temperature is ok for my tipe of 
tonner.



Adrian

Attachments

No local attachments were found for this message.