P.S. Traces were mostly 0.012 with power/ground at 0.02. Pads 0.07.
Also, I expected this first board to be a total flop. Actually, I
expect my first 5-10 to be varying degrees of failures :D This seems
more of an artform than a science!
--- In Homebrew_PCBs@yahoogroups.com, "ghidera2000
<ghidera2000@y...>" <ghidera2000@y...> wrote:
Also, I expected this first board to be a total flop. Actually, I
expect my first 5-10 to be varying degrees of failures :D This seems
more of an artform than a science!
--- In Homebrew_PCBs@yahoogroups.com, "ghidera2000
<ghidera2000@y...>" <ghidera2000@y...> wrote:
> Just attempted my first photofabrication and it failed at the
> developing stage. Within 30 seconds of immersion the board was
> completely devoid of resist...
>
> Here's what I did (all M.G. Chemicals supplies)
>