On Sat, 31 Dec 2005 17:03:55 +0100, alan00463 <alan00463@...> wrote:
need any paint or anything.
Eagle can produce component legend too, it usually consists of the
component outlines, values and/or component numbers, and other text you
want to have on the PCB. Remember to print this one mirrored for top side
and normal for bottom (if any).
ST
>On a light colored board you can see the black toner just fine, you don't
>
>
> Okay, so now I understand the "silkscreen" layer is printed in black
>
> toner on the laser printer and then transfered onto the etched board
>
> the same way you do for the copper anti-etching. Now, I recall from
>
> the pictures that the board is light colored once the copper is etched
>
> off. So what do you apply to the bare fiberglass board to make the
>
> silkscreen layer, once you have applied the toner with the silkscreen
>
> pattern? paint? dye? Does Eagle make the silkscreen layer too?
need any paint or anything.
Eagle can produce component legend too, it usually consists of the
component outlines, values and/or component numbers, and other text you
want to have on the PCB. Remember to print this one mirrored for top side
and normal for bottom (if any).
ST