Homebrew PCBs

The Dremel Multi Pro works fine, get the Drill Press to go with it 
also as it is very hard to hand hold to drill and not break the 
carbide bits.  Some don't like the Dermel tool but it has worked 
fine for me and I drill a lot of holes with it.  Get yourself a shop 
vac set up to pick up the dust.

If you are doing TT then you just print as normal to whatever paper 
type that you are going to use.  You should find in the files 
section some information on doing TT and what some have found that 
works for them and what does not.  I don't do TT myself.  I do 
positive photo process myself.

Eagle should already have a lib. of basic component modules to 
insert and should be able to design your own also.  Not a Eagle user 
right now, but looking at it and another one to use in place of IVEX 
(no longer in business) that I have now, think there is better out 
there now days.

Do look thru the Files section, most likely easier to fine the 
information that you want than search thru all the post.

Ben